-
Auto Haematology Analysers Mindray pride themselves on their dedication and experience in developing better solutions for small labs. their range of new 3-part haematology analysers is the culmination of that effort. It provides small labs with more confidence in results and less turnaround time. -
Meet the guardian of the line See beyond the surface with the 3M™ Clean-Trace™ Hygiene Monitoring and Management System. When it comes to food safety, you’ve got a lot on the line. Using hygiene monitoring to evaluate the effectiveness of your cleaning procedures is a critical aspect of an environmental monitoring program, which can help ensure the sanitary condition of your food and beverage manufacturing environment. Keep things moving with the 3M™ Clean-Trace™ Hygiene Monitoring and Management System, now re-engineered for improved stability and consistency. It’s a complete system that helps you optimize productivity, quickly prepare for audits and adhere to HACCP and FSMA rules. The system comes complete with 3M™ Clean-Trace™ Luminometer and software and is used with the following test swabs to determine the level of contamination in a sample: 3M™ Clean-Trace™ Surface ATP UXL100 3M™ Clean-Trace™ Water Plus - Total ATP AQT200 3M™ Clean-Trace™ Water - Free ATP AQF100 -
Surface ATP Test Swab 3M™ Clean-Trace™ Surface ATP UXL100 is a single-use test device that contains a swab for the collection of a sample from a surface. The swab is pre-moistened to aid in sample collection and processing. Upon activation of the test, the chemical reacts with the sample collected on the swab to produce light. The amount of the light produced is proportional to the degree of potential contamination. Measurement of the light requires the use of a 3M™ Clean-Trace™ NG Luminometer and the results are displayed in Relative Light Units (RLU). The higher the RLU number, the more contaminated the sample. Not intended for consumer use. Monitoring the effectiveness of cleaning helps reduce the risk of a food safety incident. With 3M Clean-Trace Surface ATP UXL100, monitoring for contamination is simple with real-time results. Quick detection and confirmation allows immediate corrective action to take place. This product can be used with minimal training and is easily integrated into company HACCP programs to monitor for cleaning effectiveness. Additionally, it’s easy to use and provides consistent, reliable results. -
Detects as little as 50µg of protein on surfaces and in solution 3M™ Clean-Trace™ Surface Protein Plus Test Swab PRO100 is a simple, quick, and reliable method of checking for the removal of protein residues after cleaning and quickly identifies contamination. This sensitive tool detects as little as 50µg of protein on surfaces. A quick, easy visual reading of a color change indicates the presence of detectable levels of protein and the fast results allow immediate corrective action. The 3M™ Clean-Trace™ Surface Protein Plus Test Swab PRO100 can be integrated into any Hygiene Management Program where risk areas can be effectively monitored for cleaning effectiveness. As an additional benefit, it can help to reduce the risk of biological contamination, where food residues on surfaces could potentially provide nutrients for spoilage or pathogenic bacteria to thrive. This easy-to-use device requires minimal training. Not intended for consumer use. Monitoring the effectiveness of cleaning in critical areas helps to reduce the risk of a food safety incident. With the 3M™ Clean-Trace™ Surface Protein Plus Test Swab PRO100, monitoring for contamination on surfaces and in hard to reach areas is simple with results in 10 minutes. Quick detection and confirmation allows immediate corrective action to take place. A visual reading of a color change indicates the level of cleanliness by detecting as little as 50µg of protein. No instrumentation is required to interpret the sample results. This product can be used with minimal training and is easily integrated into company HACCP programs to monitor for cleaning effectiveness. Additionally, its ease of use, reliable detection and fast, visible results can help in teaching staff the importance of cleaning. -
Water Free - ATP Test Swab 3M™ Clean-Trace™ Water-Free ATP AQF100 is a single-use test device that contains sample collection rings for the collection of an aqueous sample. The sample collection rings aid in the collection of a liquid sample for measuring free adenosine triphosphate (ATP) in solution. Upon activation of the test device, reagent in the cuvette of the test device reacts with ATP collected on the sample collection rings to produce light. The intensity of the light is proportional to the amount of ATP. Measurement of the light requires the use of a 3M™ Clean-Trace™ NG Luminometer and the results are displayed in Relative Light Units (RLU). Not intended for consumer use. The difference between 3M™ Clean-Trace™ Water-Free ATP test results and 3M™ Clean-Trace™ Water Plus - Total ATP test results done on the same sample indicate the amount of intact microbial cells in the sample. With 3M Clean-Trace Water-Free ATP AQF100, monitoring for contamination is simple with real-time results. Quick detection and confirmation allows immediate corrective action to take place. This product can be used with minimal training to monitor for cleaning effectiveness. -
Water Plus ATP Test Swab 3M™ Clean-Trace™ Water Plus - Total ATP AQT200 is designed to rapidly assess equipment sanitation processes and the efficiency of Clean in Place (CIP) procedures. It accurately detects organic contamination from microbial or product residues using ATP detection technology. The test gives an objective indication of cleanliness in water samples in seconds, and is designed for use with the 3M™ Clean-Trace™ NG Luminometer. The device tip contains sample collection rings that are coated with a unique agent to aid in the efficient collection and processing of a sample. Once the test is activated, the results are measured in the 3M Clean-Trace NG Luminometer and provided in Relative Light Units (RLU). By working in real time, food and beverage producers can test rinse waters after each CIP cycle and re-clean immediately if ‘fail’ results are obtained. Not intended for consumer use. Monitoring the effectiveness of cleaning helps reduce the risk of a food safety incident. With 3M Clean-Trace Water Plus - Total ATP AQT200, monitoring for contamination in water samples is simple with real-time results. Quick detection and confirmation allows immediate corrective action to take place. This product can be used with minimal training and is easily integrated into company HACCP programs to monitor for cleaning effectiveness. Additionally, it’s easy to use and provides reliable detection. -
UHT and ESL Beverage Testing The 3M™ Microbial Luminescence System (MLS) is a rapid method for release testing of Ultra High Temperature (UHT) and Extended Shelf Life (ESL) processed products. Following a 2 to 3 day pre-incubation of the product sample, simply pipette 50 µL of the pre-incubated sample into a well of the microplate. Place the microplate on the 3M MLS II instrument and select the appropriate assay within the software. The instrument provides real-time results in 27 minutes or less. With traditional agar methods, not only do you have to pre-incubate sample containers, you then have to wait 2 to 5 days for the microorganisms to grow on the plate. The 3M Microbial Luminesce System eliminates the second incubation period, allowing you to release product 2 to 5 days faster. That means you can reduce inventory storage space and cost, generate faster inventory turns, increase cash flow and be more flexible and responsive to customer needs. Reassuring Reliability. Using bioluminescence technology, the 3M Microbial Luminescence System detects ATP (adenosine triphosphate), an energy molecule universally present in all living organisms. This allows the 3M MLS to have faster time-to-result than traditional pH or agar tests, and more reliably detect a broad range of microorganisms than traditional methods. With the 3M MLS UHT Beverage Screen Kit, a wide variety of UHT and ESL products can be tested such as dairy products (milk, flavored milk, creamers, ice cream mixes), dairy substitutes (soy, rice, almond and coconut milks), juices (orange, apple, peach, grape, tomato), caffeinated beverages, smoothies (formulated with milk and juice), infant/medical nutrition (baby formula, nutrition shakes), coconut water, soups and broths. -
Accurate and reliable pathogen testing Be confident in your pathogen testing process and save time and labour costs with ready-to-use reagents, a single protocol for all pathogens and same or next-day results. Plus, with its space-saving design and ability to test for multiple types of pathogens simultaneously, the 3M™ Molecular Detection System helps you work efficiently and release products quickly so you can protect consumers, your business and your bottom line. 3M Food Safety listened to customers to develop an innovative approach to pathogen detection that gives organisations control over their time, protocol, process, productivity, quality and brand. Powered by unique technologies — Loop-Mediated Isothermal Amplification (LAMP) and Bioluminescence Detection — the 3M™ Molecular Detection System is a fast, accurate, easy-to-use and affordable solution. -
Aerobic Count results as soon as 48 hours The 3M™ Petrifilm™ Aerobic Count Plate is a time-saving, sample-ready plate designed to determine total aerobic bacteria populations. A built-in grid facilitates counting colonies, helping to provide fast, precise and consistent results. Each 3M Petrifilm Aerobic Count Plate contains a water-soluble gelling agent, nutrients and indicator — all the components needed for microbial growth with no agar preparation required. The 3M Petrifilm Aerobic Count Plate provides total aerobic count in as little as 48 hours. A red indicator dye in the plate colors all colonies red for better contrast and easier colony counting. The red colonies are also easily distinguished from opaque food particles that can cause confusion when using other plating methods. The 3M Petrifilm Plate Advantage In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. 3M Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For more than 30 years, food safety professionals around the world have put their trust in 3M Petrifilm Plates. That’s because 3M Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality. In addition, 3M Petrifilm Aerobic Count Plates can be used to aerobically or anaerobically enumerate lactic acid bacteria in food and environmental samples. -
Detects coliforms in bottled water 3M™ Petrifilm™ Aqua Coliform Count Plates are sample-ready media plates used to measure coliform levels and provide reliable test method for bottled water. Each plate contains a water-soluble gelling agent, nutrients and indicators in a dry, shelf-stable format. The indicator dye colors all colonies red, and the top film traps the gas produced by the coliforms. Gas trapped around red coliform colonies indicates confirmed colonies. The 3M Petrifilm Plate Advantage In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. 3M Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For more than 30 years, food safety professionals around the world have put their trust in 3M Petrifilm Plates. That’s because 3M Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality. -
Detects heterotrophic bacteria in bottled water 3M™ Petrifilm™ Aqua Heterotrophic Count Plates provide fast, accurate results in enumerating heterotrophic bacteria in the bottled water industry. These plates are used for the enumeration of heterotrophic bacteria in bottled water industries. The 3M Petrifilm Plate Advantage In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. 3M Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For more than 30 years, food safety professionals around the world have put their trust in 3M Petrifilm Plates. That’s because 3M Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality. -
Enumeration of yeast and mold in bottled water 3M™ Petrifilm™ Aqua Yeast and Mold Count Plates are a sample-ready culture medium system which contain nutrients supplemented with antibiotics, a cold-water-soluble gelling agent, and an indicator that facilitates yeast and mold enumeration. These plates are used for the enumeration of yeast and mold in bottled water industries. The 3M Petrifilm Plate Advantage In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. 3M Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For more than 30 years, food safety professionals around the world have put their trust in 3M Petrifilm Plates. That’s because 3M Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality. -
Coliform results in 24 hours 3M™ Petrifilm™ Coliform Count Plates provide a cost-effective, convenient and reliable method for testing equipment, raw materials, food products and manufacturing environmental samples. The 3M Petrifilm Coliform Count Plate is a sample-ready-culture-medium system which contains Violet Red Bile (VRB) nutrients, a cold-water-soluble gelling agent, and a tetrazolium indicator that facilitates colony enumeration in food and beverage samples. These plates provide total coliform count information with confirmed results in just 24 hours. By eliminating subsequent confirmation steps required with most traditional reference methods, the 3M Petrifilm Coliform Count Plates can help increase productivity and reduce overall lab costs. The 3M Petrifilm Plate Advantage In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. 3M Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For more than 30 years, food safety professionals around the world have put their trust in 3M Petrifilm Plates. That’s because 3M Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality. -
Confirmed E. coli results in 24-48 hours 3M™ Petrifilm™ E. coli/Coliform Count Plates provide a cost-effective, convenient and reliable method for testing equipment, raw materials, food products and manufacturing environmental samples. The 3M Petrifilm E. coli/Coliform Count Plate is a sample-ready-culture-medium system which contains Violet Red Bile (VRB) nutrients, a cold-water-soluble gelling agent, an indicator of glucuronidase activity (BCIG), and a tetrazolium indicator that facilitates colony enumeration in food and beverage samples. These plates provide both E. coli and total Coliform Count information with confirmed results in just 24-48 hours. By eliminating subsequent confirmation steps required with most traditional reference methods, the 3M Petrifilm E. coli/Coliform Count Plates can help increase productivity and reduce overall lab costs. The 3M Petrifilm Plate Advantage In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. 3M Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For more than 30 years, food safety professionals around the world have put their trust in 3M Petrifilm Plates. That’s because 3M Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality. -
Enumeration of Enterobacteriaceae in the food, beverage and bottled water industries 3M™ Petrifilm™ Enterobacteriaceae Count Plates provide a cost-effective, convenient and reliable method for testing equipment, raw materials, food products and manufacturing environmental samples and bottled water testing 3M™ Petrifilm™ Enterobacteriaceae Count Plates enable you to quickly determine potential sources of contamination. This plate enumerates all coliforms as well as potential pathogens such as Salmonella, Shigella and Yersini. The 3M Petrifilm Enterobacteriaceae Count Plate can also be read using the 3M™ Petrifilm™ Plate Reader which provides consistent, fast, automated reading and recording of results of 3M Petrifilm Plates (Aerobic Count, Rapid Aerobic Count, Coliform Count, E. coli/Coliform Count, Enterobacteriaceae Count and Select E. coli Count ) in 4 seconds. The 3M Petrifilm Plate Advantage In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. 3M Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For more than 30 years, food safety professionals around the world have put their trust in 3M Petrifilm Plates. That’s because 3M Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality. -
Rapid results in 27-31 hours from sample collection 3M™ Petrifilm™ Environmental Listeria Plates detect the presence of Listeria in environmental samples. A sample-ready culture medium containing selective agents, nutrients, a cold water-soluble gelling agent and a chromogenic indicator. This is designed to analyse environmental samples and help increase the efficiency of monitoring plant sanitation. -
Detect the presence of Listeria in environmental samples 3M™ Petrifilm™ Environmental Listeria Plates detect the presence of Listeria in environmental samples. A sample-ready culture medium containing selective agents, nutrients, a cold water-soluble gelling agent and a chromogenic indicator. This is designed to analyze environmental samples and help increase the efficiency of monitoring plant sanitation. The 3M Petrifilm Plate Advantage In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. 3M Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For more than 30 years, food safety professionals around the world have put their trust in 3M Petrifilm Plates. That’s because 3M Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality. -
Coliform results in 24 hours The 3M™ Petrifilm™ High-Sensitivity Coliform Count Plate accommodates 5 mL samples and detection of low levels of confirmed coliforms in 24 hours. This allows a 1-coliform-per-gram sensitivity if a 1:5 dilution of product is made. A 2-coliform-per-gram sensitivity is achieved if a 1:10 dilution is used. Whether testing milk, ice cream, cheese, or other food products, testing labs can benefit from the labor savings of 3M Petrifilm Plates. These plates reduce overall testing costs and allow producers to easily conform to higher sensitivity standards. 3M Petrifilm High-Sensitivity Coliform Count plates may be especially well-suited for use in facilities producing dairy products, where regulations and strict internal quality standards demand a high-sensitivity test that can deliver results quickly and accurately. The 3M Petrifilm Plate Advantage In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. 3M Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For more than 30 years, food safety professionals around the world have put their trust in 3M Petrifilm Plates. That’s because 3M Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality. -
Introducing the first self-contained anaerobic plates for lactic acid bacteria testing The 3M™ Petrifilm™ Lactic Acid Bacteria Count Plate is a time-saving, sample-ready plate designed to determine total lactic acid bacteria populations in food and environmental samples. Every day, food processors, retailers and consumers are forced to throw out food spoiled with lactic acid bacteria. These normally useful bacteria can cause undesirable changes to ready-to-eat meats and seafood, dressings and sauces, vegetables and many other processed foods. This not only contributes to food waste and costly recalls, but can also damage your brand reputation. 3M science brings you a better way to test for lactic acid bacteria in your food products, raw materials and production environment without the hassle of traditional agar methods – 3M™ Petrifilm™ Lactic Acid Bacteria Count Plates. These ready-to-use plates simplify the testing process and give accurate results in less time, helping you reduce waste, minimize recalls and protect your reputation in the marketplace. Anaerobic made easy. Now you can get true anaerobic results using standard aerobic incubation conditions. The self-contained anaerobic environment in this plate enhances the recovery of lactic acid bacteria, providing fast, accurate results for effective control of product quality and shelf life. The 3M Petrifilm Plate Advantage In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. 3M Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For more than 30 years, food safety professionals around the world have put their trust in 3M Petrifilm Plates. That’s because 3M Petrifilm Plates have streamlined, standardised and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality. -
3M Food Safety Lab Automation—moving food testing forward There's no slowing down with automated 3M™ Petrifilm™ Plate enumeration using the 3M™ Petrifilm™ Plate Reader Advanced. It’s time to advance the efficiency of your lab by automating the imaging, interpretation and tracking of results. This system achieved up to 94% reduced time to enumerate 3M™ Petrifilm™ Plates (observed on the 3M™ Petrifilm™ Aerobic Count Plate with High Counts). The 3M™ Petrifilm™ Plate Reader Advanced is a compact instrument that automates the enumeration of 10 different 3M™ Petrifilm™ Plates and the 3M™ Petrifilm™ Staph Express Disk to enhance laboratory productivity and ensure accurate, consistent readings. Results are stored in the 3M™ Petrifilm™ Plate Manager Software for data analysis. The 3M™ Petrifilm™ Plate Reader Advanced enumerates 10 different 3M™ Petrifilm™ Plates: Rapid Aerobic Count, Rapid Coliform Count, Rapid E. coli/Coliform Count, Rapid Yeast and Mold Count, Aerobic Count, Coliform Count, Enterobacteriaceae Count, E. coli/Coliform Count, Select E. coli Count, Staph Express Count and Staph Express Disk. Following incubation, 3M Petrifilm Plates can be easily fed into the 3M Petrifilm Plate Reader Advanced where each plate is imaged and enumerated via onboard fixed artificial intelligence in less than six seconds. Each 3M Petrifilm Plate artificial intelligence network was trained and validated with a wide assortment of food matrices to ensure accurate plate enumeration. The 3M™ Petrifilm™ Plate Manager Software utilises a simple and streamlined user interface to collect, store, and report 3M Petrifilm Plate results. The system recognises 10 barcode symbologies which enables users to easily map details such as technician, food type, and dilution, rather than transcribing by hand. Results can be exported to a user’s Laboratory Information Management System (LIMS) and other reporting tools. Additionally, the 3M Petrifilm Plate Manager Software allows users to access results from multiple PCs that are connected to a company intranet. -
Aerobic Count results as soon as 24 hours 3M™ Petrifilm™ Rapid Aerobic Count Plates feature technology that facilitates colony enumeration in just 24 hours for most food matrices / environmental samples and resists distortion caused by spreader colonies. Aerobic count bacteria are present in a variety of food matrices and serve as indicators for food spoilage. Getting accurate aerobic bacteria counts in your raw materials, finished product and production environment are critical to making time sensitive decisions that impact process control, cleaning decisions and, ultimately, product quality and safety. 3M™ Petrifilm™ Rapid Aerobic Count Plates are a sample ready, culture medium system, which contain nutrients, a cold water soluble gelling agent, and a dual sensing indicator technology that facilitate colony enumeration in 24 hours for most food matrices and environmental samples. Proven as reliable as the SMA plate method, 3M Petrifilm Rapid Aerobic Count Plates help agar users avoid costly retesting and delayed results due to interpretation issues caused by spreader colonies. The 3M Petrifilm Rapid Aerobic Count Plate can also be read using the 3M Petrifilm Plate Reader which provides consistent, fast, automated reading and recording of results of 3M Petrifilm Plates (Aerobic Count, Rapid Aerobic Count, Coliform Count, E. coli/Coliform Count, Enterobacteriaceae Count and Select E. coli Count ) in 4 seconds. The 3M Petrifilm Plate Advantage In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. 3M Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For more than 30 years, food safety professionals around the world have put their trust in 3M Petrifilm Plates. That’s because 3M Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality. -
Coliform results in 6 - 14 hours 3M™ Petrifilm™ Rapid Coliform Count Plates are designed to provide fast, accurate results in detecting coliform contamination. Coliform colonies may begin to appear at 6 hours of incubation as discrete yellow zones indicating colony forming units (CFUs). Presumptive coliforms may be be recorded at 14 hours. Confirmed coliforms will appear as red colonies associated with gas after 8 – 24 hours of incubation. The 3M Petrifilm Plate Advantage In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. 3M Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For more than 30 years, food safety professionals around the world have put their trust in 3M Petrifilm Plates. That’s because 3M Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality. -
E. coli and coliform results in 18-24 hours 3M™ Petrifilm™ Rapid E. coli/Coliform Count Plates provide a cost-effective, convenient and reliable method for testing equipment, raw materials, food products and manufacturing environmental samples. The 3M™ Petrifilm™ Rapid E. coli / Coliform Count (REC) Plate is a selective and differential sample ready culture medium system which contains proprietary nutrients, a cold water soluble gelling agent, 5 bromo 4 chloro 3 indolyl D glucuronide (BCIG) an indicator of glucuronidase activity, and a tetrazolium indicator that facilitates colony enumeration. The 3M Petrifilm REC Plate is used for the enumeration of Escherichia coli (E. coli) and coliforms in the food and beverage industries. These plates provide both E. coli and total coliform count information with confirmed in just 18 24 hours. By eliminating subsequent confirmation steps required with most traditional reference methods, the 3M Petrifilm Rapid E. coli/Coliform Count Plates can help increase productivity and reduce overall lab costs. -
Yeast and mold results in 48-72 hours 3M™ Petrifilm™ Rapid Yeast and Mold Count Plate features a new indicator technology that makes colonies easier to interpret. This sample-ready-culture-medium system provides results in as little as 48 hours of incubation time. Yeast and molds can grow in a wide range of conditions in raw materials, finished products and production environments, making them difficult to control. The 3M™ Petrifilm™ Rapid Yeast and Mold Count Plate method is faster and easier than the traditional agar method that requires a five day incubation period. This plate features a new indicator technology that makes colonies easier to interpret. This sample ready culture medium system provides results in as little as 48 hours of incubation time. Proven as reliable as the DRBC and DG 18 spread plate methods as well as the acidified PDA and YGC agar pour plate methods. 3M Petrifilm Rapid Yeast and Mold Count Plates also enhance productivity by eliminating the inoculation of multiple spread plates, the addition of antibiotics or tartaric acid, and the agar preparation process altogether. Faster results provide more time to monitor processes and ensure tighter process controls along with a higher quality product. -
Staphylococcus aureus results in 24 hours 3M™ Petrifilm™ Staph Express Count Plates provide Staphylococcus aureus results. S. aureus appears as distinctive red-violet colonies. Other colonies have to be checked using the Staph express disk. If you encounter high background flora in your staph testing, the 3M™ Petrifilm™ Staph Express Disk can be used to identify Staph aureus from all suspect colonies. The 3M Petrifilm Plate Advantage In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. 3M Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For more than 30 years, food safety professionals around the world have put their trust in 3M Petrifilm Plates. That’s because 3M Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality. -
Yeast & Mould results in 3-5 days This 3M Petrifilm Yeast and Mold Count Plate is a sample-ready-culture medium system which contains nutrients supplmented with antibiotics, a cold-water-soluble gelling agent, and an indicator that facilitates yeast and mold enumeration. Yeasts are easily differentiated from molds on the plate:- Yeasts are typically indicated by small, blue-green colonies with defined edges and no foci.
- Molds are indicated by large, variably-colored colonies with diffuse edges and center foci.
-
On-going Performance Monitoring for Routine Patient Testing AccuPlex Monkeypox Positive Reference Material Kit is a full-process quality solution designed to challenge the molecular test procedure from extraction to detection, ensuring clinical laboratories can have confidence in their assay results. The product contains positive materials directed against targets for Monkeypox assays.- Non-infectious and replication deficient, enables safe handling in contrast to viral samples
- Fully-extractable with a real viral protein coat; superior to “naked” transcribed RNA
- Long shelf life: 2-year stability at 2 - 8°C
-
SeraCare’s SARS-CoV-2 Quality Solution AccuPlex™ SARS-CoV-2 Reference Material, from SeraCare, is designed to measure day-to-day performance of the assay, providing both a positive and a negative reference solution. The product is available in versions that offer different SARS-CoV-2 sequence coverage: Version 1 covers the CDC and WHO consensus sequences, Version 2 has been enhanced to also include the S gene region, and Version 3 is expanded to include the full SARS‐CoV‐2 viral genome (Table 1). All products also include negative reference materials targeting the human RNase P gene. AccuPlex™ SARS-CoV-2 Verification Panel, coupled with the AccuPlex™ SARS-CoV-2 Reference Material, is a complete Quality Solution. Both products are available in three versions with different SARS-CoV-2 sequence coverage: Version 1 covers the CDC and WHO consensus sequences, Version 2 has been enhanced to also include the S gene region, and Version 3 is expanded to include the full SARS-CoV-2 viral genome (Table 1). All products also include negative reference materials targeting the human RNase P gene.- Non-infectious and replication deficient, enables safe handling of positive material
- Fully-extractable with a real viral protein coat; serves as a full-process reference material
- Compatible with assays targeting CDC and WHO consensus sequences
- Includes negative reference material for targeting sequences for the human RNAse P gene
- 2 year stability at 2 - 8°C
- Customisable to sequences of interest to meet unique assay design requirements
-
Clinical Diagnostic Quality Solutions for SARS-CoV-2 Variant Analysis AccuPlex SARS-CoV-2 Variant Panel 1 contains the full SARS-CoV-2 genomic RNA with a focus on S-gene mutations (Table 1) in three prominent variants of concern (VOC): UK variant B.1.1.7, South Africa variant B.1.351, and Brazil variant P.1. The kit has one vial for each variant as well as a fourth wild type (reference sequence NC_045512) control vial. An RNase P negative control vial is also included.- Performance confirmation of existing SARS-CoV-2 molecular assays with different variants
- Reference materials for SARS-CoV-2 variant genotyping assays
- Reference materials for SARS-CoV-2 NGS assays
- Non-infectious and replication deficient, enables safe handling of positive material
- Fully extractable with a real viral protein coat; superior to “naked” transcribed RNA
- 2 year stability at 2 - 8°C
-
Full Genome Coverage now available AccuPlex™ SARS-CoV-2 Verification Panel, from SeraCare, is optimised for assay verification at installation by documenting test performance along the assay’s range enabling laboratories to establish lower limits of detection, perform assay comparisons, and evaluate staff proficiency. The product contains positive materials including the full SARS-CoV-2 viral genome, and negative materials targeting the human RNase P gene. AccuPlex™ SARS-CoV-2 Verification Panel, coupled with the AccuPlex™ SARS-CoV-2 Reference Material, is a complete Quality Solution designed to challenge the entire molecular test procedure ensuring clinical laboratories can have confidence in their SARS-CoV-2 assay results.
- Non-infectious and replication deficient, enables safe handling of positive material
- Fully-extractable with a real viral protein coat; serves as a full-process reference material
- Compatible with assays targeting CDC and WHO consensus sequences
- Includes negative reference material for targeting sequences for the human RNAse P gene
- 2 year stability at 2 - 8°C
- Customisable to sequences of interest to meet unique assay design requirements
-
Measure day-to-day performance AccuPlex™ SARS-CoV-2, Flu A/B and RSV Reference Material Kit, from SeraCare, is designed to measure day-to-day performance of the assay, providing both a positive and a negative reference solution. Designed for use with multiplexed molecular assays that can detect SARS-CoV-2, influenza A/B and respiratory syncytial virus (RSV). AccuPlex™ SARS-CoV-2, Flu A/B and RSV Reference Material Kit, coupled with the AccuPlex™ SARS-CoV-2, Flu A/B and RSV Verification Panel, is a complete Quality Solution designed to challenge the entire molecular test procedure ensuring clinical laboratories can have confidence in their multiplex assay results.
- Non-infectious and replication deficient, enables safe handling of positive material
- Fully-extractable with a real viral protein coat; serves as a full-process reference material
- 2 year stability at 2 - 8°C
- Optimised for assay verification and day-to-day performance monitoring
-
Have confidence in your multiplex assay results for SARS-CoV-2 & Flu A/B AccuPlex™ SARS-CoV-2, Flu A/B and RSV Verification Panel, from SeraCare, is optimised for assay verification at installation by documenting test performance along the assay’s range, enabling laboratories to establish lower limits of detection, perform assay comparisons, and evaluate staff proficiency. Designed for use with multiplexed molecular assays that can detect SARS-CoV-2, influenza A/B and respiratory syncytial virus (RSV). AccuPlex™ SARS-CoV-2, Flu A/B and RSV Verification Panel, coupled with the AccuPlex™ SARS-CoV-2, Flu A/B and RSV Reference Material Kit, is a complete Quality Solution designed to challenge the entire molecular test procedure ensuring clinical laboratories can have confidence in their multiplex assay results.
- Non-infectious and replication deficient, enables safe handling of positive material
- Fully-extractable with a real viral protein coat; serves as a full-process reference material
- 2 year stability at 2 - 8°C
- Optimised for assay verification and day-to-day performance monitoring
-
Ensure antibody testing accuracy and performance To support the many SARS-CoV-2 serology assay formats available, the kit is currently offered in two configurations, one designed for IgG-specific assays and the other for total antibody tests. Series 1000 is released using the Abbott ARCHITECT SARS-CoV-2 IgG assay, and Series 2000 is released using the Roche cobas® Elecsys® Anti-SARS-CoV-2 assay. Reference materials are specifically formulated to exhibit low positive reactivity in true patient-like matrices, to test assay performance near critical signal cutoff boundaries. AccuSet™ SARS-CoV-2 Performance Panel is intended to provide an out-of-the-box solution to evaluate SARS-CoV-2 antibody detection assays with highly characterised human specimens whether generating validation data for a regulatory submission or performing assay verification in a clinical laboratory setting.
-
Ensure Strep A Laboratory Testing Assay Performance ACCURUN® reference materials are intended to estimate laboratory testing precision and can be used to detect errors in laboratory testing procedures. ACCURUN Swab Strep A Reference Material is formulated for use with molecular test methods used to detect Streptococcus pyogenes (Strep A). They are designed as whole organism reference materials that can be used to assess accuracy and performance of the full testing process – extraction, amplification, and detection – of molecular assays for Strep A. For Research Use Only. Not for use in diagnostic procedures. -
Whole-cell or whole-organism external controls Empower your results and challenge your methods with SeraCare’s ACCURUN® molecular controls and reference materials. ACCURUN molecular controls and reference materials are whole-cell or whole-organism external controls that help you monitor all aspects of your molecular testing methods and provide additional confidence in your laboratory test results. A well-designed QC program can help you avoid costly false-negative or false-positive results. ACCURUN molecular controls effectively detect low-positives closer to assay-specific cutoffs, enabling better detection of assay variability. Powerful ACCURUN controls and reference materials help to ensure complete control over assay performance monitoring. Monitors the Entire Testing Process. In order to execute the highest level of quality control, QC methods should be able to monitor the entire testing process, not just a portion. ACCURUN molecular controls are whole-cell or whole-organism controls that can appropriately challenge your assay from extraction through detection. -
Empower your results and challenge your methods with SeraCare’s ACCURUN® serology controls and reference materials. SeraCare's ACCURUN controls and reference materials are designed to be weakly reactive to help monitor your serology assays and provide additional confidence in your laboratory test results. Monitoring your assay performance can help you avoid costly repeats and, more importantly, avoid false-negative and false-positive results. With ACCURUN controls, you can troubleshoot your test methods and isolate system errors in your laboratory. Powerful ACCURUN controls and reference materials help to ensure complete control over assay performance monitoring. Challenges Your Assay More Effectively A low-positive control challenges your assay more than a medium-to-high control since it is closer to the assay cut-off; therefore, any variability in the assay will be easier to detect. Assay monitoring with ACCURUN single and multi-analyte controls improves confidence in your serology test results.
Call Us:IRL +353 (0)61-335844 / UK +44 (0)28 30833808
